I often get requests to make planes powered by the cheap motors I get from vibrating toothbrushes and similar cheap electrical equipment. I am also asked if the RC equipment from cheap RC toy cars is any good for planes. The answer I give for both questions is usually that the motors are not powerful enough and the RC equipment does not have a good enough range. I thought I had better try to build one to see if I am right.
If you have a question it is probably worth reading this video description first because the answer may already be here. To help you find my videos I made two search guides https://youtu.be/ceBSOoOHcgw or https://youtu.be/Zj4UgwkwYRk or checkout my playlists page https://www.youtube.com/user/GrandadIsAnOldMan/playlists?flow=grid&view=1
To cover off some of the comments received so far.......
Yes I could use a larger motor, or gearing to turn a larger prop.
Yes I could use larger batteries and more power.
BUT, the purpose of this project is to try to use the cheap motors I get from vibrating toothbrushes and similar electrical equipment from the bargain stores and to use the RC equipment from a cheap RC toy car, so any variation would not be part of the original project. Even using proper propellers would be a variation from sourcing the parts from the cheap toys.
I have already strayed a little by using a LiPo battery.
The RC equipment is only used for turning the motor on and off, it is not being used to control the plane in any other way, so no rudder or elevator control. It should technically be possible to use the 'second channel' to do rudder control like the very first radio control planes had in the early days of RC but I will be concentrating on seeing if we can get the plane flying under it's own power first.
The power to the motor goes through the receiver, so adding extra voltage would burn out the receiver first as it is only expecting 4.5 volts. I could set the receiver to operate a relay that controls the power to the motor and then I could use more powerful batteries for the motor, but that is then making the setup more complicated than the original plan. I may do something like that eventually just to see it fly properly.
Electric motor from a vibrating toothbrush
RC equipment from a cheap RC car
Scrap styrofoam packaging
Hot Glue Gun
Hot wire cutter
FujiFilm FinePix S4800
Serif MoviePlus Starter Edition
This project now runs over several episodes so I have put them all in this playlist https://www.youtube.com/playlist?list=PLA5a2xPRSrB3v7nI2gkMPSAD5LOoSQkzk
I will add this video to my Aircraft playlist https://www.youtube.com/playlist?list=PLA5a2xPRSrB0nZItxE_78EJP0F99Ghaki
I have over 2000 videos on YouTube covering a wide range of subjects. To find them follow my search guides https://youtu.be/ceBSOoOHcgw or https://youtu.be/Zj4UgwkwYRk or see my playlists page https://www.youtube.com/user/GrandadIsAnOldMan/playlists?flow=grid&view=1
Generally my projects are for my grandchildren to enjoy. OK, I enjoy them too. If anybody else likes them, that is a bonus. I like to keep my work as simple and basic as possible so that it can be copied easily and improved by anybody who wants to try themselves. I recycle or repurpose items rather than buy new and when I do buy I like to keep it cheap.